Black Magic Electric Fan from

The installation of the Black Magic fan was easy...thanks to the instructions provided and a web page that also detailed the instructions (forgot the link).  Long story short...remove the shroud, remove the stock fan, install the electric fan, do some wiring, and BAM!, you're in like flynn.

The entire unit fits inside of the stock shroud, so it looks stock.  This unit is set to operate at about 195 Degrees....

Below you'll see some of the for power, one for ignition on, one for the AC clutch, and one you can't see for the temperature probe on the other side (inlet) of the radiator.

Back to John's 2000 S-10